Download Print this page
Sealey AK98943 Instructions

Sealey AK98943 Instructions

Vacuum suction cup - pair

Advertisement

Quick Links

thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/
OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE kEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
WARNING! ensure Health & safety, local authority and general workshop practice regulations are adhered to when using
this tool.
DO NOT use the suction cup if any parts are damaged or missing as this may cause failure and/or personal injury.
Before each use, check condition of suction cup. examine rubber pads for excessive glaze, cuts or roughness. If any
component is worn or damaged replace immediately.
DO NOT clean the suction cup with solvents or other harsh chemicals.
use genuine parts only. unauthorised parts may be dangerous and will invalidate the warranty.
use in a suitable work area. Keep area free from unrelated materials and ensure that there is adequate lighting.
WARNING! Always wear approved eye, face and hand protection when using the suction cup.
remove ill fitting clothing. remove ties, watches, rings, other loose jewellery and contain and/or tie back long hair.
Maintain correct balance and footing. DO NOT over reach, ensure the floor is not slippery, wear non-slip footwear.
Keep children and unauthorised persons away from the working area.
ensure workpiece is secure before attaching and using the suction cup.
WARNING! ensure that the surface to which the suction cup is to be attached is non-pourous, clean, dry and free from oil
and grease.
DO NOT exceed the maximum pull capacity of the suction cup.
DO NOT use the suction cup for any purpose other than that for which it is designed.
DO NOT use the suction cup when you are tired or under the influence of alcohol, drugs or intoxicating medication.
When not in use, store in a safe, dry, childproof location.
DO NOT use any sharp object to loosen the suction cup as it may damage the rubber and prevent the tool from creating
suction.
DO NOT attempt to attach the suction cup to a person as severe bruising and/or damage to internal organs can occur.
DO NOT allow anything to interfere with the free movement of the plunger whilst the suction cup is attached to a surface.
Keep fingers clear of suction release tag during use.
DO NOT allow anything else to touch the release tab whilst in the process of lifting e.g. other lifting gear or adjacent fixtures
and fittings.
2. INTRODUCTION & SPECIFICATION
Twin profiled rubber suction cups designed for strength and reliability. Ideal for windscreen installation and glass transportation.
Capable of lifting 30kg from a horizontal position. Also suitable for other non-porous flat surfaces such as sheet metal and tiles.
Model No; . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ak98943
cup ø: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150mm
Maximum lift capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30kg (from Horizontal Position)
© Jack sealey limited
InstructIons for:
VACUUM SUCTION CUP - PAIR
Model no:
Original Language Version
Ak98943
AK98943
Issue: 1 - 24/09/13

Advertisement

loading

Summary of Contents for Sealey AK98943

  • Page 1 Ak98943 Model no: thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.