Page 3
§1 Warranty MUTEC GmbH warrants the flawless performance of this product to the original buyer for a period of two (2) years from the date of purchase. If any failure occurs within the specified warranty period that is caused by defects in material and/or workmanship, MUTEC GmbH shall either repair or replace the product free of charge within 90 days.
Functional Areas + Parameters ....12 Operating the FORMAT CHANGER advanced ..12 Parameters in the AUDIO INPUT Area ... . . 13 Parameters in the SYNC SOURCE Area .
In sampling rate conversion mode the FORMAT CHANGER advanced can be These include additional information which Word Clock or Word Clock x 256 (so-called Super Clock) synchronized exter-...
Page 10
4 WC / SC IN + OUT (Word Clock + Word Clock x 256, so-called Super Clock) This input receives a Word Clock or Word Clock x 256 signal (automatic dif- ferentiation) for the synchronization of the FORMAT CHANGER advanced. The incoming clock signal is processed electrically and immediately sent to the WC/SC output for the synchronization of connected devices.
Additionally, you should make sure that the Word Clock inputs to be con- of the signal quality can be the result! In nected to the FORMAT CHANGER advanceds output have a 75 Ω termi- this case, the perfect synchronization of all nating resistor! Most Word Clock inputs allow for enabling/disabling the devices involved could be impaired.
Connect the optical S/PDIF interface with the help of Toshiba TOSLINK- MUTEC offers optical cables of various compliant optical fiber cables. Here, you can use both plastic and glass lengths that have been specifically tested fiber-based cables.
TEST MUTE This function mutes all outputs of the FORMAT CHANGER advanced, which includes not only the digital audio outputs but also the WC/SC output. Use the function to configure your equipment set-up, so as to identify possible problems caused by interconnected signals or interference.
CHANGER advanced feature a temperature-compensated stability of +/- 10 ppm, which corresponds to the specifications of AES 11, Grade 2 (!). Thus you can use the FORMAT CHANGER advanced even in smaller set-ups as a master clock for the synchronization of other equipment. If one clock...
EMPHASIS If the audio input signal contains emphasis information, the status LED EMPHASIS lights up. In this case, the FORMAT CHANGER advanced does not process the data status to maintain signal transparency on the output side. EXTERN SYNC...
Need help?
Do you have a question about the FORMAT CHANGER advanced and is the answer not in the manual?
Questions and answers