§1 Warranty MUTEC GmbH warrants the flawless performance of this product to the original buyer for a period of two (2) years from the date of purchase. If any failure occurs within the specified warranty period that is caused by defects in material and/or workmanship, MUTEC GmbH shall either repair or replace the product free of charge within 90 days.
Before first power-on we recommend to read the chapters INTRODUCTION and BRIEF INSTRUCTIONS to get to know the general functionality of MC-1 and MC-1.1 and to reach a fast system integration. Boxes which contain a triangle...
Page 10
AES 3 – 1992 (R1997) and AES 11 – 1997/2003. The output impedance is 110 Ω (XLR connectors, male). Double AES/EBU outputs for signal splitting and distribution are available at MC-1.1 only. 4 AES/EBU IN This input receives a balanced digital AES/EBU audio or blank frame signal compliant with AES 3 –...
The unit was packed carefully. Nevertheless we recommend to check the The condition of the packaging content directly after opening the package: material and the device should 1 x MC-1 or MC-1.1 be checked carefully additionally. 1 x Power cable If there are any damages please refer to...
Page 12
\\\\\\\\\\\\ I N S TALLAT I O N I N S TALLAT I O N I N S TALLAT I O N > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >...
2 Switching the DATA switch selects between the individual We also recommend reading the CONTROLS functions within one function area. AND TERMINALS chapter for information on how to connect MC-1 or MC-1.1! 1. SELECT selects individual function areas. SELECT + DATA operation...
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > MODE Function Area The function area MODE at MC-1 includes four, and at MC-1.1 seven different format conversion functions. During the conversion process, the SCMS data included in incoming S/PDIF streams will be analyzed and reported in the STATUS area as »ORIG«...
S/PDIF coaxial output simultaneously. During this processes »real« format and electrical conversions of the S/PDIF and AES/EBU data streams will be done based on the double conversion circuitries of MC-1.1. Both signal paths can be used with different clock rates simultaneously.
S/PDIF inputs to both S/PDIF outputs without any modification. PASS is not available when one of the following functions is used: AES/EBU is the signal source OPTICAL ↔ SYMMETRICAL is activated ↔ AES/EBU (only MC-1.1) is activated S/PDIF ↔ AES/EBU (only MC-1.1) is activated S/PDIF DISTRIBUTION (only MC-1.1) is activated...