Advertisement
5. Attach also the status LCD's main
cable to the controller card.
7. Place the LCD panel next to the
rear cover so that you can attach its
cable to the inverter card.
9. Position and secure the cover to the
status LCD.
6. Slide the inverter card into its
sleeve. Insert and lock its cable.
8. Tilt the LCD over so that you can
connect its cable to the controller
card. Tilt the LCD into the rear
cover.
10. Position the frame to the rear
cover and snap it into place.
Secure the frame with four screws
and replace the screw caps.
8
Advertisement
