Automatic Tuning - Daewoo DLP32B1 Manual

AV
Your television has 1 ("the second one
depends on the special features
of your television") SCART socket.
The AV function is used when you are connecting
an external source to your TV via the SCART
sockets or RCA sockets. Every time you press the
( )
button, your default settings will change
according to the socket connection below.
1. AV1 when using SCART socket 1 (with RGB
support)
2. AV2 when using the RCA socket "when
TV has only 1 scart" AV2 when using
SCART socket 2 "when TV has 2 scart
sockets"
3. AVS when using S-Video socket "when TV
has only 1 scart" AV3 when using RCA socket
"when TV has 2 scart sockets"
4. AVS when using S-Video socket "when TV has
2 scart sockets" You can return to TV mode by
pressing AV button again.
Control Menu
( )
Press the button and the MAIN MENU
all the headings of the different controls
will appear. The Up-Down buttons
( )/( )
enable you to move between
the different control menu functions where
you can indicate your choice by pressing
( )
the button.
Tuning and storing the programs on
your television
You can either tune the programs automatically
or manually storing them in your television. As
a result of your television's Automatic Tuning
System (ATS), the programs found are
automatically ordered in accordance to the Turkish
channels that send their title and teletext
information, followed by those programs that do
not provide teletext title information and those
without the teletext features. Finally, foreign
programs that send their teletext title information
lined up.
Please note: In the event that your television
does not receive a signal for 5 minutes, then it
will automatically switch to the stand-by mode.
This will be indicated on screen during the last
minute before switching to the stand-by mode.
A. Automatic tuning and storing of the
television program channels
By pressing the
control, you will gain access to the
program settings menu on your television
screen.
( )
button of your remote