Advertisement
Instructions for Use
Part 2 – Adjusting Clamp Height
In some cases, the clamp height may need to be adjusted to improve comfort
during the treatment. To determine if an adjustment is necessary, remove the clamp
from the clamp housing.
Remove the clamp from the clamp housing:
Return the clamp lock to the locked position and place the head of the flaccid penis
into the clamp. Gently begin closing the clamp. Continue to close to tighten—
listening to the number of "clicks" required—until reaching a setting where you
could comfortably wear the clamp without discomfort for at least 30 minutes.
1-877-228-5147
Press on the release tab near
the bottom of the clamp housing
Next, press the
clamp lock and
open the clamp
9
Advertisement
