Re-attaching the extension rods:
Place the extension rod into the pelvic ring by aligning the flat side of the
•
extension rod with the flat portion of the "key" hole in the pelvic ring, as
depicted.
Attach the screw to the extension rod
•
through the hole in the pelvic ring
and tighten. Do not overtighten.
Overtightening may damage your
RestoreX device.
Attach the second rod using
•
the same process.
With the extension rods in
place, re-connect the main
body of the RestoreX device:
Slide and hold the extension
•
release while sliding the body
onto the rods, as shown.
8
PELVIC RING
EXTENSION RODS
EXTENSION
RELEASE
Instructions for Use
Align flat side
of extension
rod with flat
portion of
"key" hole in
pelvic ring
RESTOREX MAIN BODY
1-877-228-5147