Appendix 2 - Baracoda RoadRunners Programming Manual

APPENDIX 2

The SI prefix is a two or three character string:
] c m
where
] : SI indicator
c : Symbology Identification
m : Modifier characters (optional)
Symbology Character
A Code 39
B Telepen
C Code 128
D Code One
E EAN/UPC
F Codabar
G Code 93
H Code 11
I ITF 25
K Code 16K
L PDF417
Modifier Characters
The modifier character is determined by summing the option values of each symbology. If the sum is greater than 9,
use A, B, C, D, E , F in the place of 10, 11, 12, 13, 14 and 15.
Code 39 Option Values
0 No check character or Full ASCII
1 Reader has performed mod 43 check
Reader has performed mod 43 check
2
and stripped the check character
Reader has performed Full ASCII
4
conversion
Telepen Option Values
0 Full ASCII mode
1 Double density numeric mode
Double density numeric followed by full
2
ASCII
Full ASCII followed by double density
4
numeric
Code 128 Option Values
0 Standard
Function code 1 in first character
1
position
Function code 2 in second character
2
position
Concatenation according to ISBT
4 specification has been performed, and
concatenated data follows.
RoadRunners Linear CMOS Programming guide (Oct. 05)
M MSI code
N Anker Code
O Codablock
P Plessey Code
Straight 2 of 5 (two bar start/stop
R
codes)
Straight 2 of 5 (three bar start/stop
S
codes)
T Code 49
X Other Bar code
Z Non Barcode data
24/24