Baracoda RoadRunners Programming Manual

RoadRunners Linear Imager
Baracoda, Inc. (US Office)
45 Main street - Suite 616 - Brooklyn, NY 11201
Ph: 718 488 9600 - Fx: 718 488 9601
The bluetooth name and Bluetooth registered trademarks are owned by Bluetooth SIG, Inc., and are used by Baracoda under license. The Baracoda names and Baracoda trademarks are
own by Baracoda. All specification are subject to change without notice - Non contractual pictures © Baracoda - All rights reserved
Programming Guide
Important notice
Every effort is made to ensure the accuracy of
our product information; however, we accept no
responsability for errors or omissions including, but not
limited to, the implied warranties of merchantability and
fitness for a particular purpose. We shall not be liable for
errors contained herein or for incidental consequential
damages in connection with the furnishing, performance,
or use of this material.
Specifications or version may be subject to change
without notice. The actual specification and version are
based on the product delivered.
Introduction
Scanning a series of programming bar code labels can
configure the scanner.
Please verify that your Roadrunners has a firmware version
equal or superior to 2.5 before using it with this
programming Guide. Some functionalities may not work with
older versions of the firmware. Refer to the Baracoda-
Manager documentation in order to know how to upgrade
your scanner.
Baracoda SA (Europe Office: France)
30 Avenue de l'Amiral Lemonnier - 78160 Marly-Le-Roi
Ph: +33 1 30 08 89 00 - Fx: +33 1 30 08 89 98