Wall Mounting (Optional) - Dell E2219HN User Manual

Hide thumbs Also See for E2219HN:

Table of Contents

2. Remove the stand assembly to the monitor

a. Use a long screwdriver to push the release latch located in a hole just above

the stand

b. Once the latch is released, remove the base away from the monitor

Wall Mounting (Optional)

(Screw dimension: M4 x 10 mm) Refer to the instructions that come with the

VESA-compatible base mounting kit

1. Place the monitor panel on a soft cloth or cushion on a stable flat table

2. Remove the stand

3. Use a screwdriver to remove the four screws securing the plastic cover

4. Attach the mounting bracket from the wall mounting kit to the LCD

5. Mount the LCD on the wall by following the instructions that came with the base

mounting kit

NOTE: For use only with UL-listed wall-mount bracket with minimum weight/

load bearing capacity of 2 84 kg

│

Setting Up the Monitor

Table of Contents