Samsung MXD-K100XN Installation Manual page 4

Safety Information
CAUTION
Arrange the cables between the AHU-KIT and
outdoor unit after connecting.
Attach the cover securely so that the electrical
component box cover does not get loosen.
If the cover is attached incompletely, it can cause
●
trouble with a heat generation, electric shock or
fire of the terminal board.
Install the cables with supplied cables firmly. Fix
them securely so that external force is not exerted
to the terminal board.
If the connection or fixing is incomplete, it can
●
cause trouble with a heat generation, electric
shock or fire.
Use the copper wire for the power cable
and use only rated cables and parts.
Make sure there is no leakage after installation.
Toxic gas may generate when refrigerant gas contacts with fire.
●
WARNING
Make sure of a earthing.
Do not connect the earth wire to the gas pipe,
●
water pipe, lighting rod or telephone wire.
If earthing is incomplete, electric shock or fire
●
may occur.
Install the power cable and communication cable of the AHU-KIT at least 1m away from electric
appliances.
Noise may heard depending on the electric wave though the cables are installed away from electric
●
appliances.
Keep the space in front of AHU-KIT for maintenance.
●
4 English
Install designated ELB for AHU when installing the
power cable.
If you do not install designated ELB for AHU,
●
electric shock or fire may occur.
Make sure that the power for AHU-KIT is under
maximum, and over minimum voltage allowed.
It may cause electrical component malfunction
●
which can damage the product.
Make sure electrical circuit is correctly connected.
Overheating may cause fire.
●
Follow the instructions in this manual to make
sure that the condensed water dripping from
the drain hose runs out properly and insulate
the drain pipe so that dew condensate does not
generate.
Household goods may get wet if the drain pipe is
●
not properly installed.