Samsung MXD-K100XN Installation Manual page 20

Installation
Sensor installation example 2
1) Check the sensor and the sensor holder.
NOTE
Type Sensor OD (mm)
EVA IN sensor
EVA OUT sensor
2) Put the sensor on the pipe.
NOTE
Sensor attachment method.
• Choose the location where temperature can be measured
correctly. (Refer to page 18)
• Try to attach closely to the contact surface.
• Do not use the sensor holder.
3) Hold the sensor and put aluminum tape around to fix the sensor.
4) Put rubber tape around the sensor.
5) Use cable-tie to tighten the sensor around the pipe.
6) Attach the insulator around the sensor.
20 English
Sensor holder ID
(mm)
Ø 6 Ø 6.8
Ø 7 Ø 7.8
Sensor
Insulator
Aluminum tape
Pipe
Aluminum tape
Rubber
tape
Cable-tie
Rubber tape
Sensor
Sensor
Sensor
Cable-tie
Insulator