Huawei IPC2702-VF-VP Quick Start Manual page 16

IPC2702-VF-VP
Quick Start Guide
Table 2-1 Hardware port connection
Port
NIC port
Audio input
port
Audio output
port
DC 12
V±10% power
port
VIDEO OUT
port
Alarm input
(IN0, COM0)
Alarm output
(COM1,
OUT1)
RS485 port
(TX+, TX–,
RX+, and RX–)
SD card slot
Issue 10 (2014-02-25)
Description
Connects a standard Ethernet cable.
RCA female connector for receiving analog audio signals from
devices such as a sound pickup device.
Connects to an external audio device such as a speaker.
Connects to a 12 V±10% direct current (DC) power supply.
NOTE
When connect to the power supply, the separate power supply
indicator (red) on.
Sends analog video signals. You can connect the camera to a
TV monitor through this port to view analog videos.
Alarm input port.
NOTE
The voltage and current of the external power supply cannot
exceed DC 12 V and 300 mA.
Alarm output port.
Connects an external Pan Tilt Zoom (PTZ).
Installs an SD card.
NOTE
Before installing an SD card, verify that the SD card is not in
the write protection state.
Before removing an SD card, verify that the SD card is not in
the write protection state. Otherwise, some data may be
lost or the SD card may be damaged.
Before installing or removing an SD card when the camera is
running, stop video recording first.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Device Ports and Description
8