Radiocrafts RC2301DK Quick Start

Hide thumbs Also See for RC2301DK:

Table of Contents

Download this manual

Radiocrafts

Embedded Wireless Solutions

RC2301DK Demonstration Kit Quick Start

ZigBee®-ready Location Engine demo

Introduction

The RC2301DK demonstration kit shows a ZigBee®-ready location demo application on the

Figure 8 Wireless Z-stack from Texas Instruments. To make the demonstration a minimum of

8 nodes are required:

•

One Location Dongle (D) configured as network coordinator

•

Six reference nodes (R1 to R6) configured as network routers

•

One blind node (B) with RC2301 configured as network router

The kit contains all 8 boards and each board has an identifier label on the reverse side.

RC2301DK Demonstration Kit Quick Start (rev. 2.0)

RC2301DK

Page 1 of 4

Table of Contents

Do you have a question about the RC2301DK and is the answer not in the manual?

Page 1 RC2301DK Demonstration Kit Quick Start ZigBee®-ready Location Engine demo Introduction The RC2301DK demonstration kit shows a ZigBee®-ready location demo application on the Figure 8 Wireless Z-stack from Texas Instruments. To make the demonstration a minimum of 8 nodes are required: •...
Page 2 Displacement should be 0 if the image shall be placed in the top left corner of the image window in the application. Figure 3 Background tab Press Update, and the picture should become visible in the application window. ©2007 Radiocrafts AS RC2301DK Demonstration Kit Quick Start (rev. 2.0) Page 2 of 4...
Page 3 This is done in the Blind Node Setup tab. Double-click on the blind node you want to change, set the parameters and press update. For a description of the parameters see the ©2007 Radiocrafts AS RC2301DK Demonstration Kit Quick Start (rev. 2.0) Page 3 of 4...
Page 4 Fax: +47 22 71 29 15 NO-0484 OSLO NORWAY ZigBee is a registered trademark of the ZigBee Alliance. © 2007, Radiocrafts AS. All rights reserved. ©2007 Radiocrafts AS RC2301DK Demonstration Kit Quick Start (rev. 2.0) Page 4 of 4...