Disk Settings; Record Settings - Speco N32NRE Quick Start Manual

32 channel fr nvr

Hide thumbs Also See for N32NRE:

Table of Contents

Figure 4-2

Click

to edit an IP camera as shown on the below left. Input the new IP address, subnet mask, gateway, username

and the password of the camera. You can check "Sync to IPC" to modify the IP address of the IP camera via different

network segments for being in the same network segment with the NVR. Click "OK" to save the settings.

Click

to edit the added camera as shown on the above right. Input the new camera name, IP address, port, username

and the password of the camera. You can click "Test" to test the effectiveness of the input information. Click "OK" to

save the settings. You can change the IP camera name only when the added camera is online. Click "Next" to continue.

4.6 Disk Settings

Disk Settings. You can view the disk number, disk capacity of the NVR and serial number, Read/Write status of the disk.

Click "Formatting" to format the disk. Click "Next" to continue.

Table of Contents