Shark Rotator Lift-Away Quick Start Manual

Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.
QUICK START GUIDE
WHAT'S INSIDE
A Vacuum Pod
B Motorized Floor Nozzle
C Handle & Hose
D Wand
ASSEMBLY
1. Insert double accessory holder into the side
of the pod above the Lift-Away button.
2. Place pod onto floor nozzle post.
3. Insert wand into pod.
4. Insert handle into wand.
5. Attach hose clip to wand.
6. Connect hose to back of pod.
NOTE: For proper operation, ensure
all parts are firmly CLICKED into place.
A
B
C
4
(Click)
5
(Click)
6
(Click)
ZU572_QSG_REV_Mv4
E Double Accessory Holder
F 12" Crevice Tool
G Upholstery Tool
H Pet Power Brush
1
(Click)
2
(Click)
F
Suction Control
Slide to MIN to increase
maneuverability on carpets.
Slide to MAX for more
suction on bare floors.
D
Power/Surface switch
Press switch to select
3
surface setting or to turn
(Click)
off power. To engage
brushroll, step on floor
nozzle and tilt handle back.
E
Press release
buttons to lift pod
off nozzle, or to
release handle or
wand.
Attach
your
desired
accessories
G
Attach accessories
to handle or wand.
H
For additional parts
and accessories, visit
sharkaccessories.com
LIFT-AWAY® Pet with
Self-Cleaning Brushroll
2 WAYS TO CLEAN
UPRIGHT
LIFT-AWAY®
Handle Release
Wand Release
Lift-Away Release