Table of Contents
Advertisement
When network and firmware upgrade are ready, the following message will be shown.
- CURRENT : it shows the current product version, and the server version.
User should choose the version and enter the password. Enter the retry, and then the upgrade will be
completed. [Upgrade will take 1min or longer depends on the network speed]
Reboot the system to apply the firmware.
- ENTER PASSWORD: product password is required.[see. 8.7.A password]
- RETRY : Product firmware begins.
- EXIT : To maintain the current values, the [ENTER] or [MENU] key must be pressed.
9-7. Product Information
In this menu, the production information such as the hardware model number, firmware build number, etc.
can be viewed. It goes back to the Main Menu whenever any key is pressed.
10. Replaying the recorded image
28
Advertisement
Table of Contents
