Advertisement
Trouble Shooting
SYMPTOM
Water overflowing Water level too high Check and set water level to 30mm below
Continuous boiling
Water not hot
No water
CAUSES
Float valve defective
Faulty element
Power not on
Element faulty
Water has been
turned off
Blocked float valve
Flow restrictor
obstructed
Blocked filter
ACTION
overflow pipe, remove float valve washer;
clean and reinstall or replace and adjust
ball valve arm if necessary
Remove float and check to ensure that
there is no water in it - replace if necessary
Ensure float valve closes off (does not leak)
Replace element
Check that power is on
Replace element
Turn on water
Remove float valve and clean out hole or
replace valve
Contact supplier
Change filter cartridge
Advertisement
