Advertisement
Table of Contents
Barilift 1000 Scale
The
Barilift 1000 Scale
adds new life and function to
your existing patient lifter. Simply attach between your
boom arm and hanger bar and you have just turned
your patient lifter* into a precision scale system.
This workhorse is built to last with the quality and
reliability you've come to expect from SR®Scales.
The Bari 1000 Weight Module is a compact precision
scale system designed for use with approved* lifter
designs employing compatible boom and hanger
configurations.
Completely self-contained, the Bari 1000 Weight
Module combines the latest microprocessor and load
cell technology to provide accurate and repeatable
weight data with a calibrated accuracy of 0.1%.
One button Auto-Zero Electronics makes patient
weighing quick and easy. The Bari 1000 Weight
Module derives its power from a single 9-volt battery
which will provide up to 3000 readings.
KEY PRODUCT FEATURES
• Light Weight - Weighs just over 1 pound. Bring it with you when you need it.
• Built to Last - Load cell is machined from a single block of steel to maximum strength and performance.
• Accurate - Display patient weight data with 0.1% accuracy
• Battery Operated - 1 common 9v alkaline battery providing approximately 3,000 weigh cycles
• Programmable Auto Power Down (APD) to conserve power.
• Time Saver - Combine tasks to limit patient handling
• One Button Auto-Zero - Tare your seat sling to zero and you're ready to weigh
• *The model shown fits the Hoyer® type patient lifter. Other configurations are available. Please call for a configuration
that is compatible with your specific patient lifter - see product brochure for details
861 Taylor Rd., Suite "I"
Columbus, Ohio 43230
www.ame-medical.com
PAGE 1
Phone: 1-866-633-2337
Fax: 1-614-237-1177
customerservice@ame-medical.com
Advertisement
Table of Contents
Related Manuals for SR Scales Barilift Scale 1000
Summary of Contents for SR Scales Barilift Scale 1000
- Page 1 Barilift 1000 Scale Barilift 1000 Scale adds new life and function to your existing patient lifter. Simply attach between your boom arm and hanger bar and you have just turned your patient lifter* into a precision scale system. This workhorse is built to last with the quality and reliability you’ve come to expect from SR®Scales.
- Page 2 iNStallatiON Attach the top hook of the SR801 Weight Module to the loop of the lifter boom, making sure that the hook is STEP 1: fully engaged. Important: Tighten retainer screw until fully engaged. Attach the swivel bar to the bottom of the scale system. Refer to lifter manual’s instructions. STEP 2: STEP 3: Attach the sling/stretcher securely.
Need help?
Do you have a question about the Barilift Scale 1000 and is the answer not in the manual?
Questions and answers