Method 2 Using Ready-To-Use Image; Setting Orientation; Calibration - Waveshare 4.3inch HDMI LCD User Manual

4.3inch HDMI LCD User Manual
6. Waiting for rebooting

METHOD 2 USING READY-TO-USE IMAGE

1. Download image we provided on wiki
- Raspbian for 4.3inch HDMI LCD
2. Extract the image file and write to SD card
3. Insert the SD card to Raspberry Pi and power on.

SETTING ORIENTATION

After installing driver, you can set the orientation as below
For V1 version
⚫
cd LCD-show/
#Choose one command to execute
sudo ./LCD43-show X
For V2 version
⚫
cd LCD-show/
#Choose one command to execute
sudo ./LCD43-show-V2 X
【Note】X can be 0, 90, 180 or 270

CALIBRATION

If the touch of RPi LCD is not calibrated, you can calibrate the touch screen.
1. Copy and install calibrator tool
6 / 8