How To Use; Hardware Connection; Method 1, Install Driver - Waveshare 4.3inch HDMI LCD User Manual

4.3inch HDMI LCD User Manual

HOW TO USE

The touch of the LCD can be driven in two ways: Method 1: Install driver manually;
Method 2: Using ready-to-use Image

HARDWARE CONNECTION

Insert LCD directly to 40PIN header of Raspberry Pi.
⚫
Using the HDMI adapter or HDMI cable to connect HDMI interface of LCD to
⚫
Raspberry Pi's

METHOD 1, INSTALL DRIVER

1. Download lasted OS
2. Extract image from ZIP archive and write it to SD card
3. After writing, modify the config.txt file which is located at root directory (BOOT) of
SD card. Append these statements to the end of config.txt file
This instruction is based on Raspbian OS
1
image from Raspberry Pi
1
website.
4 / 8