Celestron 44420 Information, Specifications And Instructions page 6

Snapshots – You can use "AMCap" to take snapshots but you can only take one image at a time and then save it on your
computer. For more efficient snapshot capturing, you can use "Ulead" (you will have to open the program to choose the
imager as the device) and instructions on "Ulead" can be found from their help menu and additional information can be found
on their website (www.ulead.com).
Another way to take snapshots is to go to "Control Panel" and find "Scanners and Cameras". You will see the screen below
(left side) and double click on "Electronic ocular-R". Then, the screen on the right below will appear and click "Next".
The wizard screen shows "Take and Select Pictures to Copy". The "Preview" mode will be on the left half of the screen and
you can then focus sharply the object you want to image. When ready, click "Take Picture" near the bottom left under
"Preview" on the screen and the picture will show up under "Pictures" on the right half of the screen. Continue taking as many
images as you want until done.
Now you want to save the pictures to your computer files. First click "Next" and the screen allows you to "Choose Picture
Name and Destination" and then click "Next". You can select the images you want to save and then click "Next" and your
pictures will be copied to your computer as you selected. The wizard will then give you "Other Options". If you are done,
check that option, and click "Next" and the screen will show "Completing the Scanner and Camera Wizard", and click "Finish"
to close the wizard.
6