Getting Started - Celestron 44420 Information, Specifications And Instructions

Before using your microscope imager, you first need to install the driver, software, and related files. This is a short and easy
process and will only take a few minutes.
First, put the included installation CD-ROM in your computer CD/DVD drive. Do not connect the USB cable of the imager
to the computer until the driver and software are installed on your computer or the imager may not work properly.
The following screens (left to right) will appear during the installation on most computers although variations may appear on
some operating systems or even with the same operating system. The screens below are shown with the XP operating system.
The first screen to appear after you insert the CD-ROM is shown below left. You will be asked which action you wish to take
to open the CD-ROM. Shown is the typical choice to make but you can make your own choice and then click "OK".
Now you will double click on "Setup" using the file that is
highlighted on the screen directly below.

Getting Started

From the next screen that appears below, double click on
"soft" and it will take you to the next screen.
Select the language and click on "OK"
Now you will install the Ulead photo software. It is
recommended to close all other open Windows programs.
2