Celestron 44420 Information, Specifications And Instructions page 5

Choose a setup type. Most people select "Complete" but
you can select "Custom" if you opt to. Then click "Next".
The driver is now being installed.
Remove the CD-ROM from your drive. Now, connect the USB cable to the microscope imager and to a USB port on
your computer.
You now have many different choices. If you want to capture videos, you can choose "AMCap" from your programs under
"Electronic ocular-R" and your will see the screen below where you will double click on "AMCap" or you may have a shortcut
to "AMCap" and you will directly enter the program. For taking snapshots, see the section below.
To begin the installation click "Install".
.
The installation of the driver and related files is
complete. Click "Finish" to exit the installation process.
5