Installation Instructions; Installer Setting -How To Enter Installer Setting Mode - LG MFL67500701 Manual

INSTALLATION INSTRUCTIONS

16
INSTALLATION INSTRUCTIONS

Installer Setting -How to enter installer setting mode

! CAUTION
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user
injury or property damage. This must be set by an certificated installer, and any installation
or change that is carried out by a non-certificated person should be responsible for the
results. In this case, free service cannot be provided.
1
. With the FAN SPEED button pressed,
press the RESET button.
2
. By using the TEMPERATURE SETTING
button, set function code and setting value.
(Please refer the Installer Setting Code
Table.)
3
. Press the ON/OFF button toward the
indoor unit 1 time.
4
. Reset the remote controller to use the
general operation mode.
Refer to the Installer Setting Code Table
on the next page.