Advertisement
Installation Of Your Power Lift Chair Model: 119 continued
7. Remove the clevis pin from the back recline motor tip. Slide the
motor tip onto the back recline bar. Insert clevis pin through
the hole in the tip and bar. Slide plastic bushing onto the clevis
pin. Insert hair pin into the hole at the end of the clevis pin as
shown.
8. Return the chair to the seated upright position by pressing the
blue up button on the hand control.
9. Attach the bottom of the outside back to the Velcro on the arm
cross rail. Slide the back wings (one per side) into the brackets
as shown in the diagram.
8
NO.
Picture
Specification
Bolt
Lock Washer
Flange Lock Nut
Wrench
Clevis Pin
Plastic Bushing
Hair Pin
9
Qty.
4
4
5
1
1
1
1
9
continued
Advertisement
