Advertisement
Power Lift Chair Operation Model PR119 continued
6. To lift the chair from a seated position (footrest closed), press button (S6).
Continue holding button until chair reaches the desired height. Then release
the button.
7. To lift the chair with the back open (back down, footrest closed), press
button (S4). Continue holding the button until the chair reaches the desired
height. Then release the button.
8. To close and lift the chair from a reclined position (footrest up, back
down), press button (S6). If you want to bring the chair to a seated position,
hold the button until the footrest closes, then release it. Press button (S2) to
bring the back the rest of the way up to seated position. If you want to close
and lift the chair, hold down the button until the chair stops. All 3 motors will
automatically shut off when the back closes all the way and the chair reaches
its highest position.
9. Getting into your lift chair. While standing next to your chair, press button
(S4 or S6) and raise the chair to a height you can sit against. This height will
vary from person to person depending on the individual's needs. Raise the
chair high enough so you do not have to flop down into the chair. Flopping
down into the chair will damage it and could cause personal injury.
Press button (S3 or S5). As the chair continues downward, adjust yourself
into a position that is comfortable to you. Continue holding button until chair
is in the seated position (chair firmly on the floor), then release the button.
Continue operating the chair with buttons S1 thru S6 until you reach your
desired position.
10.Getting out of your chair. Press button (S4 or S6) and raise the chair to a
height that enables you to easily stand. Release the button. Return the chair
to the seated position (chair firmly on the floor) after getting out of the chair
so children, pets or obstructions do not get under the chair. Repeat no. 9 when
you want to sit down.
Note: The motors are set to shut off when they reach their fully extended
or fully retracted position if the selected button is not released. If you
should go past your desired position, select the button to bring you
back to your desired position. You can repeat the process as often as
you like.
11
Advertisement
