Advertisement
Table of Contents
DISCOVER | INSTALLATION INSTRUCTIONS
CAFE TABLES SHIP IN THREE (3)
SEPARATE CARTONS. 1-TOP,
1-BASE-BOTTOM DISC, 1-BASE COLUMN
1.
Place the work surface upside down on a cardboard or carpeted surface to prevent finish from scratching.
2. Place the column on the top and align the six (6) holes in the mounting plate with the predrilled holes in the
top.
3. Using a screwdriver, secure the column to the top with the six (6) #12-7/8" screws included in the hardware
pack.
4. With the column fully secured to the top, place the base plate on column and align the four (4) holes in the
center of the base plate to the four (4) holes in the inner ring in the column.
5. Screw in the five (5) nylon glides into the bottom of the base plate.
12.02.14 | Rv1
Café Bases
Advertisement
Table of Contents
Related Manuals for Artcobell CAFE Series
Summary of Contents for Artcobell CAFE Series
- Page 1 DISCOVER | INSTALLATION INSTRUCTIONS Café Bases CAFE TABLES SHIP IN THREE (3) SEPARATE CARTONS. 1-TOP, 1-BASE-BOTTOM DISC, 1-BASE COLUMN Place the work surface upside down on a cardboard or carpeted surface to prevent finish from scratching. 2. Place the column on the top and align the six (6) holes in the mounting plate with the predrilled holes in the top.
- Page 2 DISCOVER | INSTALLATION INSTRUCTIONS Grommet Mount Power Unit Before installing the base to the top, follow the installation instructions included with the grommet mount power units (PDC-3G20, PDC-MG22, PDC-MG40) to secure the power unit to top. 2. Place the top upside down on cardboard or carpeted spacers to prevent the table from resting on the power unit while installing the base.
Need help?
Do you have a question about the CAFE Series and is the answer not in the manual?
Questions and answers