In-Call Options - Nokia 8110 User Manual

Your phone provides a number of control func-
tions that you can use during a call. To access
these functions during a call, press and hold the
left (Menu) . The in-call options available
are (depending on the services you subscribe to):
Mute/Unmute
Switches on/off your phone's microphone, as
well as any other microphones connected to it.
Send DTMF
The Dual Tone Multi Frequency tones allow you
to communicate with answering machines,
computerised telephony systems etc. Make a
call to the desired phone number, select
DTMF option and enter memory location num-
ber from which you want to send the DTMF.
Hold/Unhold
Allows you to put a currently active call on hold,
so that a new call can be initiated.
automatically becomes active, when the new call is
terminated.
Drop call
Ends the currently active call.

4. In-Call Options

Swap
This function is available when you have both
active and held calls.
call to hold and vice versa, so that you may con-
verse with the other party.
Conference/Private
This function lets you make a conference call
where up to six persons can take part. Selecting
Conference
pants in the call. To talk privately with one par-
ticipant, move the highlighted bar to
Private
Send Transfer
If you have one held call and one active call, se-
lecting Transfer will connect these calls
with each other and disconnect you from both
of these calls.
Data/Speech
The old call
During a dual mode call, selecting Speech
while in data mode allows you to switch to voice
mode, and selecting Data while in speech
mode allows you to switch to data mode.
For more information, refer to any documenta-
tion or instructions supplied with your data
adapter, data application or fax application.
14
Swap transfers the active
allows you to join the partici-
and select the desired person.
©1998 Nokia Mobile Phones. All Rights Reserved.