How To Implement The General Inspection; How To Connect With Pc - BNC P4017 Quick Start Manual

4. How to Implement the General Inspection

After you get a new USB series oscilloscope, it is recommended that you
should make a check on the instrument according to the following steps:
1. Check whether there is any damage caused by transportation.
If it is found that the packaging carton or the foamed plastic protection cushion
has suffered serious damage, do not throw it away first till the complete device
and its accessories succeed in the electrical and mechanical property tests.
2. Check the Accessories
The supplied accessories have been already described in the "Appendix A:
Enclosure" of this Manual. You can check if you have all the accessories by
referencing Appendix A. If it is found that there is any accessory lost or
damaged, please get in touch with the distributor of BNC responsible for this
service or the BNC's local offices.
3. Check the Complete Instrument
If it is found that there is damage to the appearance of the instrument, or the
instrument can not work normally or fails in the performance test, please get in
touch with the BNC's distributor responsible for this business or the BNC's
local offices. If there is damage to the instrument caused by the transportation,
please keep the package. With the transportation department or the BNC's
distributor responsible for this business informed about it, repairing or
replacement of the instrument will be arranged by the BNC.

5. How to Connect with PC

1. Install the Software
Install the software on the supplied CD (*.exe).
2. Double-click the created desktop shortcuts.
Model
P4017
3. Connection
Use the supplied USB cable to connect the USB port of the Oscilloscope in
Ports Introduction to the USB port of a PC.
Note: If you use a USB cable which is not supplied by us, some problems such
as connection error and signal disturbing might occur.
4. Install the USB driver
In the window of software, press F1 to open the help document of the software.
Follow the steps of title "I. PC Software USB Driver Install Guide" in the
document to install the driver.
info@berkeleynucleonics.com | www.berkeleynucleonics.com
Shortcut
VDS_S4
6
Berkeley Nucleonics Corporation
2955 Kerner Blvd, San Rafael, CA 94901 | 800-234-7858