Mounting - Busch-Jaeger Busch-easycare 1518 USV Manual

®
Busch-easycare
5

Mounting

The uninterruptible power supply is designed for wall mounting using the
mounting material supplied with it. You should check the mounting wall before-
hand to verify whether it is suitable for fixing the power supply onto it:
Weight of the uninterruptible power supply: 8.5 kg,
Dimensions: 244 x 325 x 178 mm.
Insufficient air convection may result in the uninterruptible power supply being
destroyed. For this reason, you must observe the following points:
» The ventilation openings on the device must be located at the top and bottom.
» You must ensure that air can circulate sufficiently above and below the de-
vice. Therefore, there must be a distance of at least 50 mm between the de-
vice and other devices or walls.
» Do not cover the ventilation outlets under any circumstances.
Fig. 1: Dimensional drawing
Technical manual 0073-1-8701
Mounting
│28