Hach Flow Cell FC 48/10 USC Quick Start Manual page 8

FlowCell FC 48/10 USC
1.4.1 FlowCell design
1 Outlet for 6 mm hose
3 Inlet for 8 mm hose
5 Trigger connection to initiate
cleaning
Before setting to work, the FlowCell has to be mounted correctly on the sensor and be filled
with water completely.
The Ultrasonic FlowCell is used for cleaning of the measurement windows with
severe dirt contamination. It is suitable for photometers with a path length of up to
10 mm.
The FlowCell provides a light source on the inside which can be activated by
pressing the light button on the side of the housing. When cleaning is in process a
blue LED is used, if cleaning is inactive the light will be white.
1 2
N O T I C E
6
2 Monitoring window
4 Power supply
6 Light button
5 4 3
English 7