SAFETY INSTRUCTIONS Follow the instructions and warnings below. This will prevent damage to the device, injury or property damage that may result from improper use of the device. Read the manual carefully before using the product for the first time and keep it for future reference. •...
Page 4
There is a risk of electric shock. • Do not bend the power cord too much and do not place heavy objects on the power cord. Damaged power cord can lead to fire. • Do not use the device if the power cord, plug or socket are damaged. There is a risk of electric shock or fire.
PRODUCT DESCRIPTION ASSEMBLY Connect the signal cable with the base.
Page 6
Insert the pillar. Fix it with 6 bolts M8x25 and spring washers at the bottom of the base. Place handlebars into the pillar. Secure the handlebars with 4 bolts M6x20 and spring washers. Fix the handlebars to the base with 2 bolts M10x30 and spring washers.
Tighten 4 bolts M6x10. CONTROL PANEL Turn on / off device MODE: 4 modes that can be used 88, P1, P2, P3. 88 is manual mode, where you can setup time and speed manually. P1, P2, P3 are automatic modes. When you choose these modes, the speed and time are pre-set.
MODES Manual mode You can adjust speed 2, 4, 6,……34, 36 P1 automatic mode The speed changes periodically to 2, 4, 6, ….34, 36, 34,….6, 4 in 0,5 second intervals between each speed. P2 automatic mode The speed changes periodically to 4, 8, 12,….32, 36, 32,…..12, 8 in 5 second intervals between each speed.
• Protect the console from damage and contact with liquids • The computer, adapter, plug and the machine must not come into contact with water. • Do not expose your computer to sunlight and check that the batteries are working properly to prevent battery leakage and damage to your computer.
Standing Massage / Vibration Stand on the massage / vibration plate and grab the handle with your hands, stand upright. Exercise is focused on exercising the whole body. One-leg massage / vibration Put one foot on the vibrating pad and bend it easily in your knee.
Page 11
According to valid legal regulations it depends whether the Buyer is the End Customer or not. “The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not conclude and execute the Contract in order to run or promote his own trade or business activities. “The Buyer who is not the End Customer”...
Page 12
The Seller shall settle the Warranty Claim within 30 days after the delivery of the defective Goods, unless a longer period has been agreed upon. The day when the repaired or exchanged Goods is handed over to the Buyer is considered to be the day of the Warranty Claim settlement. When the Seller is not able to settle the Warranty Claim within the agreed period due to the specific nature of the Goods defect, he and the Buyer shall make an agreement about an alternative solution.
Need help?
Do you have a question about the VibroGym Lotos 18712 and is the answer not in the manual?
Questions and answers