SAFETY INSTRUCTIONS • Read the manual carefully before first use and keep it for future reference. • Follow all warnings and instructions including assembly instructions. Use the device only for intended purposes. • Follow assembly instructions. Inform all users about proper use and safety instructions. Assembly can be done by adult person.
ASSEMBLY INSTRUCTIONS STEP 1: Put the cover (8) on the upright tube (11). Then lock the under upright tube (11) to the upright tube plate (9) with hex bolts (6) and arc washers (7), and then put the cover (8) on it. STEP 2: Insert the upper upright tube (20) into the under upright tube (11), secured with the pop-pin knob (18) at a proper height as shown.
Page 7
STEP 3: Insert the massage plate (4) which has already installed the motor (1) into the upper upright tube (20), and then attach the massage plate (4) to the upright tube (20) with hex bolts (6) and arc washers (7) STEP 4: Put the belt (2) on the two sides of the motor (1).
WARNING: A. Assembly is ready. Please be noted that the unit only can keep on working for 20 minutes, and then it should be powered off at least for half an hour, i.e. it only can work again after it’s powered off for half an hour.
can regulate the intensity of the massage by changing the force with which you lean against the belt. 3. Start/stop the machine by pressing the main switch. 4. The product is recommended for people who are 16-70 years old and for everyone who does not suffer from health problems that prohibit the use of this type of massage device.
MAINTENANCE AND STORAGE INSTRUCTIONS STORAGE 1. Do not store the device: • Near heat sources and open flames. • In places where long-term exposure to direct sunlight may occur. • In humid or dusty environments and near flammable substances. 2. Conditions for transport and storage: •...
Page 11
According to valid legal regulations it depends whether the Buyer is the End Customer or not. “The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not conclude and execute the Contract in order to run or promote his own trade or business activities. “The Buyer who is not the End Customer”...
Need help?
Do you have a question about the Rexabelt IN 7450 and is the answer not in the manual?
Questions and answers