Advertisement
2a
VALVE ASSEMBLY WITH FLEXIBLE HOSE VALVE CONNECTIONS
Press TEE (8) onto SPOUT SHANK (5) making certain that the O-RING (9)
is properly seated on SPOUT SHANK (5). Push COUPLING (4) into TEE (8)
and attach to SPOUT SHANK (5) and tighten.
Thread HOSE CONNECTOR (6, 6A) to VALVE CONNECTIONS (7, 7A).
Connect water supply to VALVE BODIES (1,1A) with 1/2" IPS FLEXIBLE
SUPPLIES (2) (not included. Use adjustable wrench to tighten connections.
Do not over tighten.
Connect HOT water supply to inlet of left SHANK and COLD
water supply to right SHANK.
3
DRAIN ASSEMBLY (6542.140/.170)
Apply a bead of PUTTY around underside of DRAIN FLANGE (1) flange.
Insert DRAIN PLUG (2) into SINK drain hole.
Hold DRAIN PLUG (2) to prevent turning and assemble GASKET (3), WASHER (4),
and LOCKNUT (5) from underneath sink.
Apply sealant to threaded end of TAILPIECE and thread into lower end of DRAIN PLUG.
Connect other end to trap.
1
7
1/2" PIPE
THREAD
2
FLEXIBLE
SUPPLIES
HOT
5
9
6A
8
4
6
3/8 O.D.
BULL-NOSE
RISERS
COLD
3/8 COMPRESSION
CONNECTION
PUTTY
1A
7A
COUPLING
NUT
3
COMPRESSION
NUT
FERRULE
1
SINK
2
3
4
5
2
60186 REV.1.7 (11/15)
Advertisement
