Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Greenbrook Urinal
6516 Top Spud & 6517 Back Spud Series
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is
installed properly, please read these instructions carefully before you begin. (Certain installations may require professional
help.) Also be sure your installation conforms to local codes.
BEFORE YOU BEGIN
!
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTES:
• Pictures may not exactly define contour of china and components.
• Observe all local plumbing and building codes.
• Refer to local codes and manufacturer's instructions for flush valve requirements.
• Carefully inspect the new urinal for damage.
• Fixture dimensions are nominal and conform to tolerances by ASME Standard A112.19.2.
• Site preparation may require additional tools and hardware.
RECOMMENDED TOOLS AND MATERIALS
Safety Glasses
Tape Measure
Thread Sealant
1/4" Ratchet
6516 Top Spud
108 mm to 133 mm
(4-1/4" to 5-1/4")
MANUAL
OVERRIDE
BUTTON
292 mm
(11-1/2")
8mm x 25 mm
(5/16" x 1") SLOT
3/4" SPUD
K2 HANGERS
697 mm
(27-1/2")
212 mm
(8-3/8")
411 mm
(16-1/8")
420 mm
(16-1/2")
102 mm
C/L OF OUTLET
FINISHED
(4")
FLOOR
Product names listed herein are trademarks of AS America Inc.
© AS America Inc. 2018
Adjustable Wrench
Blade Screwdriver
FINSHED WALL
SUPPLY DN 20 mm
(3/4" I.P.S.)
15
285 mm
(11-1/4")
446 mm
(17-1/2")
380 mm
(15")
121 mm
(4/3/4")
432mm (17")
MAXIMUM
610mm (24")
OPTIONAL
TO FINISHED
FLOOR
13mm
(1/2")
GASKET
102mm
13mm
(4")
(1/2")
2" N.P.T.
FINISHED
INSIDE THREADS
WALL
DETAIL OF OUTLET CONNECTION
Pencil
Hole Cutting Equipment
Levels
419 mm
(16-1/2")
50 mm
67 mm
8mm x 25 mm
(2")
(2-5/8")
(5/16" x 1") SLOT
697 mm
(27-1/2")
212 mm
(8-3/8")
411 mm
(16-1/8")
420 mm
(16-1/2")
102 mm
FINISHED
(4")
FLOOR
6517 Back Spud
FINSHED WALL
K2 HANGERS
285 mm
(11-1/4")
446 mm
(17-1/2")
380 mm
(15")
121 mm
(4/3/4")
432mm (17")
MAXIMUM
610mm (24")
OPTIONAL
TO FINISHED
FLOOR
C/L OF OUTLET
13mm
(1/2")
GASKET
102mm
13mm
(4")
(1/2")
2" N.P.T.
FINISHED
INSIDE THREADS
WALL
DETAIL OF OUTLET CONNECTION
7302379-100 11/18
55 mm
(2-1/8")
Advertisement
Table of Contents
Related Manuals for American Standard 6516 Top Spud Series
Summary of Contents for American Standard 6516 Top Spud Series
- Page 1 6516 Top Spud & 6517 Back Spud Series Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
-
Page 2: Complete The Installation
In Canada: In Mexico: In the United States: AS Canada, ULC American Standard B&K Mexico American Standard Brands 1 Centennial Ave. 5900 Avebury Rd. S. de R.L. de C.V. Mississauga, Ontario... -
Page 3: Instrucciones De Instalación
Serie 6516 Acople Superior & 6517 Acople Posterior Gracias por elegir American Standard - el parámetro de primera calidad por más de 100 años. Para asegurarse de que el producto esté instalado correctamente, por favor lea estas instrucciones cuidadosamente antes de comenzar. (Ciertas instalaciones pueden requerir ayuda profesional.) Asegúrese de que su instalación cumpla con los códigos locales. -
Page 4: Complete La Instalación
En Canadá: En México: En los Estados Unidos: AS Canada, ULC American Standard B&K México, American Standard Brands, 5900 Avebury Rd. S. de R.L. de C.V. 1 Centennial Ave. -
Page 5: Instructions D'installation
6517 Alímentation Par L’arriére Nous vous remercions d'avoir choisi American Standard - synonyme de qualité supérieure depuis plus de 100 ans. Pour être sûr que ce produit soit bien installé, veuillez lire attentivement ces instructions avant de commencer. (Certaines installations peuvent requérir une aide professionnelle.) Assurez-vous également que votre installation soit conforme aux codes locaux. -
Page 6: Terminer L'installation
Au Canada : Au Mexique : Aux États-Unis : AS Canada ULC American Standard B&K Mexico Marques American Standard 5900 Avebury Rd. S. de R.L. de C.V. 1 Centennial Ave. -
Page 7: Model Numbers
© 2015 AS America, Inc. NOTE TO INSTALLER: Please give this manual to the customer after installation. Products visit our website at: www.americanstandard-us.com To learn more about American Standard Selectronic ® or e-mail us at: CRTTEAM@americanstandard.com For Parts, Service, Warranty or other Assistance,... -
Page 8: Care Instructions
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. All American Standard Products Are Water Tested At Our Factory. UNPACKING Some Residual Water May Remain In The Valve During Shipping. -
Page 9: General Description
(6") MIN. FOR 3/4" TOP (3) MAX. SPUD FIXTURES CAUTION: Use only American Standard supplied transformers and cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any components *Note: The Critical Line (-C-L-) on Vacuum will void the warranty. - Page 10 Fig. 3 FLUSH VALVE INSTALLATION FINISHED WALL CENTER LINE OF FIXTURE SPUD INSTALL SWEAT ADAPTER; Fig. 3 Turn water supplies off before CAUTION beginning (A-B)= Note: Install Optional Sweat Adapter (Supplied) for 32mm copper pipe supply line. (1-1/4") FILE EDGES 1.
- Page 11 FLUSH OUT SUPPLY LINES; Fig. 6 Fig. 6 1. Remove STOP VALVE COVER (1) from STOP VALVE (2). REMOVE COVER 2. Open STOP VALVE (2) with a flat blade screwdriver. 3. Turn on water supply to flush line of any debris or sediment. 4.
-
Page 12: Maintenance
If these items do need replacement they must be purchased separately or order the complete flush valve assembly from American Standard. 1. Remove STOP VALVE COVER (1) from STOP VALVE (2). 2. Turn water supply off. - Page 13 REPLACE BATTERY; Fig. 11, 11a Fig. 11 1. Loosen SET SCREW (1) with 2.5mm Hex Wrench (2) in back of FLUSH VALVE COVER (3). Fig. 11. 2. Rotate COVER (3) to the right and pull off. Fig. 11. 3. Turn COVER (3) over and disconnect the SENSOR (4) from the BATTERY HOLDER (5).
- Page 14 SET DETECTION RANGE Fig. 13 (If Required); Fig. 13 & 14 Note: The detection distance is preset and ideal for most installations. Should an adjustment be required, follow the steps below. 1. Loosen SET SCREW (1) with 2.5mm Hex Wrench (2) in VIEW “A”...
-
Page 15: Troubleshooting Flowcharts
P ro d uc t n a me s l i st e d he re i n are t r a d e ma r ks o f A S A m er i ca , In c . ©20 1 5 AGAIN TO PRIME THE VALVE. To learn more about American Standard Selectronic® Products visit our website at: DOES FLUSHING STOP? www.americanstandard-us.com or e-mail us at: CRTTEAM@americanstandard.com... - Page 16 Pro duct nam es lis ted herein are tra demar ks of AS Ame rica , I n c . ©2 0 1 5 1-1/4" SPUD ASSEMBLY FOR (6062.601) To learn more about American Standard Selectronic® Products visit our website at: www.americanstandard-us.com or e-mail us at: CRTTEAM@americanstandard.com M965647 REV. 1.4 (7/15)