Table of Contents
Advertisement
TOOL OPTIONS
OVERHEAD SUSPENSION
To work effectively, your VXL/VXM tool must be properly installed. This installation includes, in
some cases, proper suspension of the tool over the container to be strapped, and the proper
placement of a strapping dispenser to provide a continuous easy supply of strapping for the
application. The VXL/VXM can be suspended in three different operating positions by using the
proper tool hanger and hardware.
Consult the table below for the appropriate configuration for the tool application.
NOTE: Each hanger is supplied with two #10-24x3/4" socket head cap screws (Part No. 008731) for
mounting the hanger to the tool.
VERTICAL STORAGE
TOP SEALING *
HORIZONTAL SEALING *
VERTICAL SEALING *
P/N 306397
P/N 274437
P/N 274437
P/N 274164
* Shown with the recommended Overhead Tool Balancer, Signode Model Number P-5602.
WEAR PLATE,
Part No.306857
An optional wear plate can be installed on any
VXL/VXM tools. This option is to protect the base
plate from abuse from rough surfaces such as brick
and block. The wear plate is secured to the tool
using two 10-24x3/8" (Part No. 023099) button head
cap screws.
35
Hide quick links:
Advertisement
Table of Contents
