Philips SW5700 Manual page 22

22
English
1
2
7 sec.
7 Place the retaining rings back onto the shaving
heads and turn them clockwise to reattach the
retaining ring.
Each retaining ring has two recesses and two
projections that fit exactly in the projections
and recesses of the shaving head holder.
- Turn the ring clockwise until your hear a click to
indicate that the ring is fixed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface, as this may
cause damage to the shaving heads.
8 Reinsert the hinge of the shaving head holder
into the slot of the shaving unit. Close the
shaving head holder ('click').
9 To reset the replacement reminder, press and
hold the on/off button for approx. 7 seconds. If
you do not reset the replacement reminder, the
shaver resets automatically after 9 shaves.