Yamaha BD-940 Service Manual page 17

10 For setting the proxy server, press
to select "Yes" or "No" , then press ENTER.
Do you use the proxy server?
Yes
Address
Port
Next
• If selecting "Yes":
The IP address or proxy server name and port
number for the proxy server specified from
your internet service provider are entered
using the screen for inputting characters.
• If selecting "No":
Go to the next step.
11 Select "Next" , then press ENTER.
12 For the advanced setting (the setting of
the Ethernet connection speeds), press
/ to select "Yes" or "No" , then press
ENTER.
• Normally select "No", then press ENTER.
• The Ethernet connection speeds can be set
when you select "Yes", then press ENTER.
• As automatic detection is made (factory preset
mode), this setting is not normally necessary.
If a situation occurs in which the Ethernet
connection fails, etc., change the setting and
confirm if the Ethernet connection successfully
works.
When the connection speed is set, select
"Next", then press ENTER.
Option
Ethernet Connection Speeds
Auto-Detection
10M Half Duplex
100M Half Duplex
Next
/
No
10M Full Duplex
100M Full Duplex
13 For testing the connection to the internet,
after confirming the settings, press
to select "Test" , then press ENTER.
"Test" is available only when setting to obtain the
IP address automatically.
Confirm the current setting.
IP Address : xxx xxx xxx xxx
Netmask : xxx xxx xxx xxx
Gateway : xxx xxx xxx xxx
DNS Address : xxx xxx xxx xxx
xxx xxx xxx xxx
MAC Address : xx:xx:xx:xx:xx:xx
Test
New MAC address will appear on
the TV screen as shown above.
14 Press / to select "Complete" , then
press ENTER.
BD-940
/
Complete
17