Getting Started; Install The Batteries - BT FREEWAY PRO TWIN User Manual

6196 BT Fway Pro Tw UG [2]

Getting started

Install the batteries

Your BT Freeway Pro mobile radios are each supplied
with a rechargeable NiMH battery pack.
However, each mobile radio will operate with 3 x AA
alkaline batteries (not supplied) if required.
1. With the back of the radio facing you, lift the battery
cover latch up to release and remove the battery cover.
2. Insert the battery pack ensuring that the metal contacts
are facing out as shown.
Or
Insert 3 x AA alkaline batteries, ensuring that the + and –
marked on the batteries match up with those marked
inside the battery compartment, as shown.
Metal
charging
pads
3. Reposition the battery cover and press down until it clicks
into place.
All manuals and user guides at all-guides.com
4/6/04 10:17 am
BT Freeway Pro Twin – Issue 02 – Edition 02 – 04.06.04 – 6196
Or
Page 5
Please note
If the belt clip is attached you will
need to remove it first. See
"Attaching the belt clip" on page 7.
5