6196 BT Fway Pro Tw UG [2]
1. Press
, the
Your radio will rapidly scan each of the 8 channels and
pause for 5 seconds on any active channel so you can
hear the transmission, before resuming the scan.
If an active channel is found and you hear a transmission:
To respond to the other radio, press
To exit the transmission and continue the channel scan,
press
or
If you activate scan while the sub-channel is set to 0
then the radio will check for any activity on each channel
regardless of the code in use on that channel.
If you activate scan while the sub-channel is set between
1 and 38 your radio will detect a transmission on any
channel so long as this transmission is using a sub-channel
(CTCSS). It will not detect a transmission on any channel
that is not using a sub-channel.
To end scanning, press the
Delete channels from the scan list
You can temporarily remove a channel from the scan list,
for example, to avoid nuisance transmissions.
All manuals and user guides at all-guides.com
4/6/04
10:17 am
BT Freeway Pro Twin – Issue 02 – Edition 02 – 04.06.04 – 6196
icon is displayed.
within 5 seconds.
PTT
.
button.
Page 15
Using your mobile radios
It is suggested that you always
scan using sub-channel 0.
You cannot remove your home
channel from the scan list (your home
channel is the channel your radio
was set to when you activated scan),
15