Switching Channel Monitor On Or Off; Talking To Another Radio - BT FREEWAY PRO TWIN User Manual

Hide thumbs Also See for FREEWAY PRO TWIN:
Table of Contents

Advertisement

6196 BT Fway Pro Tw UG [2]
12
Using your mobile radios
When channel monitor is ON you
will hear a lot of background noise
along with any weak transmissions.
REMEMBER!
To communicate with others, all
mobile radios in your group must
be set to the same channel and
sub-channel.
All manuals and user guides at all-guides.com
4/6/04
10:17 am
BT Freeway Pro Twin – Issue 02 – Edition 02 – 04.06.04 – 6196
Switching key lock on:
1. Press and hold
and the
Switching key lock off:
1. Press and hold
and the

Switching channel monitor ON or OFF

When you are not receiving a call your handset
automatically mutes the speaker so that you will not
hear weak signals or background noise. By switching
channel monitor ON you can hear transmissions on
your selected channel that you would not hear under
normal circumstances as the signal is too weak.
To temporarily switch channel monitor ON, press and
hold the
To switch channel monitor OFF, release the

Talking to another radio

1. Press and hold
2. Hold the radio about 5 to 7cm from your mouth and
speak into the microphone. The LED indicator will stop
flashing and glows steadily.
Page 12
for 4 seconds until you hear a beep
icon is displayed.
for 4 seconds, you will hear a beep
icon is no longer displayed.
button.
.
PTT
button.

Advertisement

Table of Contents
loading

Table of Contents