Troubleshooting Table - Hanseatic HFD18560A1WDI User Manual

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. You can put
your own and future users' lives in danger. Only authorised specialists are allowed to
carry out this repair work.
Problem Possible cause
Compressor and Socket has no electricity sup-
interior lighting off. ply.
Mains plug is loose.
Compressor off, in- Desired temperature has
terior light on. been reached.
Appliance cools Temperature has been set
too quickly. too low.
T h e a p p l i a n c e Temperature has been set
doesn't cool suffi- too high.
ciently.
Door is not tightly closed or
door seal is not completely
tight.
The appliance is near a heat
source.
Food has been stored warm. Only store cooled foods.
Too many goods frozen.
Ambient temperature is too
low or too high.
Compressor seems defec-
tive.
Appliance is mak- Operating noises are func-
ing a noise. tional and are not a sign of
malfunction.
Unusual noises.
Troubleshooting table
Solutions, tips, explanations
Check the socket with another appliance.
Check the tightness of the mains plug.
Further cooling not required. When the in-
side temperature rises, the compressor au-
tomatically switches on.
Select a higher setting (see "Setting the tem-
perature" on page EN-14).
Select a lower setting (see "Setting the tem-
perature" on page EN-14).
See 'Checking and cleaning the door seals'
on page EN-24.
Place insulation plate between the applianc-
es or change location.
Freeze a maximum of 10 kg at any one time.
Adjust the ambient temperature to the climate
category (see "Start-up" on page EN-29).
Set "Super freeze" (see page EN-14).
If the compressor does not switch on within
an hour, please contact our Service depart-
ment (see page EN-38).
Humming: Refrigeration unit is running.
Flowing noise: Refrigerant is flowing through
the pipes.
Clicking: Compressor is switching on or off.
Check that it is stable.
Remove any objects from the appliance.
Remove any foreign matter from the back of
the appliance.
Page EN-37