Configuration - Upmost Technology netTV3 System User Manual

Configuration

Before configuration you have to make sure that your PC and your T1 or T2 are connected to the
same router. If your network configuration mode is PPPoE and there is no router, please use the
Ethernet cable to connect your T1 or T2 and PC directly.
T1 Configuration
1.
If your network mode is PPPoE, please skip Step 1. If it is Dynamic or Static IP, please login the
corresponding router to add four virtual server ports first.
Enter the router's "Virtual Servers" page, and click the "Add New" button to add the service ports
3512/80/3514/3515 for T1 as following. Type the T1 IP Address in the IP Address field. The
protocols of ports 3512/80 are "UDP" and ports 3514/3515 is "TCP".
Then it will display as following. You can use the management tool to diagnose if these four
ports can work normally.
✍
Port 3512/UDP is used for communication with T2;
Port 80/UDP is used for communication with Client;
Port 3514/TCP is used for communication with Main T1 (only available for Backup T1);
Port 3515/TCP is used for T1 login and management.
6