Upmost Technology netTV3 System User Manual page 5

T2 Connection
Connect cable or antenna
Connect the Coaxial/RF cable to the Antenna IN of T2.
Connect to network
Connect the ETHERNET port to the corresponding port on your Modem or Router using
the Ethernet cable.
When the NET indicator on the front panel is red, it means LAN functionality is enabled.
When it is green, either WAN or WAN+LAN functionality is enabled.
Connect Power Source
(Remember to place the step at last.)
Connect the supplied power adapter to the port labeled DC5.5V, and plug the power
adapter into an electrical outlet.
When T2 starting up, the PWR indicator on the front panel will turn green.
5