Upmost Technology netTV3 System User Manual page 36

Remote control panel
Open the channel list
Video quality settings key
0~9 channel number keys. Press one or two
channel numbers to switch to the desired channel.
+100 channel select key. When the desired
channel number is a three digit number, press the
key and then press the last two digits can switch
channel quickly.
Next channel (Channel up, as CH33 à CH34)
Last channel (Channel down, as CH34 à CH33)
Channel return, press it to return to last channel.
Video quality setting
Press the " " button, it will pop up the settings page as
right.
Video Quality
The video quality has four items: ECO, CIF, H-D1 and D1,
user can select according to the displayed bit rate (the
default is CIF). The application will remember the quality
status and use the same quality when login next time.
The resolution and video/audio bit rate of each quality is as
following:
Resolution
352x240
Video bit rate 128kbps
Audio bit rate
✍
If your mobile device connects internet by using 3G or 4G network which charged by data flow, you
can select ECO to save cost. When select it the bit rate will be limited to 150kbps (as the above
diagram), but it may appear mosaics when the video has a great change (requires higher bit rate).
ECO CIF
352x240 480x352
Auto adjustment:128kbps ~ 2Mbps
Fixed: 24kbps
H-D1 D1
720x480
36