Upmost Technology netTV3 System User Manual page 23

Recording Test
Use this item to record all T2 Tuners under the
specified T1.
Select "Recording Test" in the Test Operation.
Input T1 ID and password and specify the three
channels to be tested, and then click the "Start"
button to begin to test.
Then it will record the three channels of all
Tuners under this T1 one by one. Each Tuner
will have a private recorded file with 90S length
(each channel 30S).
The recorded files are saved in the "Record"
folder as default.
✍
§ The recorded file's name consists of T2 MAC and the character "A" or "B". You can get T2 MAC
address on the sticker labeled at the bottom of T2Box unit. The last character "A" means Tuner A
and "B" means Tuner B.
§ If a Tuner is being connected when test, the application will skip it and test next one. And it will
return to record it after all other Tuners have been recorded. It will wait until the user quits, so we
suggest you test T2 when there are fewer users online.
Specify a Tuner to Watch
Use this item to connect the specified Tuner and
watch its TV programs.
Select "Recording Test" in the Test Operation.
Input T1 ID and password, then enter T2 MAC
and select Tuner (Tuner A or Tuner B), and then
click the "Login" button to connect and watch it.
When watching, you can click the " " button to
record the current program.
Play Recorded Files
After Recording Test, you should play the
recorded files to assess the T2 network speed.
Select "Play Recorded Files", It will list all
Tuners' recorded files in the right PlayList and
automatically play them in the video area. You
can assess the network conditions according the
recorded files' video quality.
23