Advertisement
Fig.7
Fitting Battery Protector
4.3.
BATTERY PROTEcTOR
4.3.1.
When the wrench is not in use, remove the battery and cover the terminals with the protector (Fig.7) to prevent short circuit.
CP3004 Impact Wrench: When operated in accordance with these instructions and tested in accordance with En 28662-2: 1994 results
in the following vibration emission declared in accordance with BS En12096: 1996.
Measured vibration emission value: . . . . .0.5m/s²
Uncertainty:. . . . . . . . . . . . . . . . . . . . . . . .0.19m/s²
These values are suitable for comparison with emission levels of other tools that have been subject to the same test.
This tool may cause hand-arm vibration syndrome if its use is inadequately managed.
Recommended Measures to reduce risk of hand-arm vibration syndrome:
This item represents a low Hand Arm Vibration risk to users. The calculated maximum usage period exceeds 8 hours. We recommend
appropriate safety equipment is utilised and regular breaks for the operator are employed to reduce any residual risk of fatigue or
repetitive strain injury.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a
recycle centre and disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
Rechargeable battery contains nickel cadmium (niCad). It is recyclable. Take to your local recycling centre to be disposed of
properly. Do not incinerate niCad battery as it may explode when exposed to fire. Do not attempt to open battery pack.
•
For battery removal refer to section 3.1
Dispose of batteries according to local authority guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of
products containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance
scheme. Jack Sealey Ltd's Batteries Producer Registration number (BPRn) is BPRn00705
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Risk of Hand Arm Vibration Injury
Environmental Protection
Battery Removal
Sole uK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Press To
Remove Battery Protector
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
www.sealey.co.uk
CP3004
Issue: 3 - 05/01/12
Advertisement
