Table of Contents
Advertisement
Testing Sound Reception
Test transmitter transmission and
remote control receiver reception.
Channel Switch
Power Switch
Set the channel switch on the transmit-
ter to the same channel as the remote
control receiver. Place the transmitter
in the room in which you intend to
use it. Slide power switch on.Turn on
a radio.
Adjust
Channel
Hint: All five dots in remote control receiver variable light display light:
- If you turn remote control receiver power on before transmitter power. You
will also hear static noise. Turn volume down and turn transmitter power on.
- If the remote control receiver is too far away from the transmitter. Move the
remote control receiver closer to the transmitter.
- If loud sounds are transmitting.
Power
Indicator
9
Power/Volume Dial
Power
Indicator
Place the remote control receiver in
the room in which you intend to use
it. Rotate the power/volume dial to
turn power on. Adjust the remote
control receiver location.
• Variable light display lights when
sound is received by remote
control receiver:
- One or two dots light for
shallow sounds.
- Three or more dots light for
louder sounds.
• If you experience interference
(buzzing or static, etc.) while using
one channel setting, switch both
units to other channel. Selecting
a channel is usually a one time
adjustment.
Advertisement
Table of Contents
