Remote Control Receiver
Battery Installation (Optional)
The remote control receiver operates using
the enclosed AC adaptor or battery power.
9V (6LR61)
Shown Actual Size
• Locate the battery compartment door on the back of the remote
control receiver.
• Loosen the screw in the battery compartment door with a Phillips screw-
driver. Lift to remove the battery compartment door.
• Snap the terminals of a fresh, 9V alkaline battery into the remote control
receiver connectors.
• Replace the battery compartment door and tighten the screw with a
Phillips screwdriver. Do not over-tighten.
Compartment Door
6
Battery